Hi Andy,
The loop through on a dvr or muliplexer is for connecting other equipment to the video signals, say you have a control room with a 16 channel dvr,you might have say six PTZ (pan/tilt/zoom )cameras connected to channels 1-6,you could put ...
a call monitor usually allows you to have a second monitor that switches between cameras. You can normally control the dwell time ( speed ) in which the cameras switch from one to another. This allows you to have the main monitor with a 16ch view ...
Thankyou for your reply i ment to say call mointor.On every dvr i have seen there is an out put for the monitor but there is also a call monitor connection i assume this is for a secondary monitor but i just wanted it confirmed. i also wondered wh...
Hi there i am new to cctv and have fitted a few basic systems .i always like to expand my knoledge and was wondering if anyone can tell me what the loop function on dvr's is used for and what would be the best situation when it can be used and als...
Welcome to the November 30, 2009 edition of the Security Cameras and CCTV Practices blog carnival. We have a lot of new material in this edition, including one submission from another contributor! Here at ApexCCTV, we are excited to have multiple ...